Professional Tool Reviews for Pros
When you are wiring a house, either high or low voltage there are several situations where you will come across the need to arm yourself with good electrical wire pulling tools. It’s simply part of the job and something that even the best laid plans will intersect with from time to time. Overall this isn’t a terribly difficult situation to deal with, but depending upon whether you are in the midst of a complex retrofit, or a more open new construction situation, the tools you use can change the job from one of extreme frustration to one that is more or less routine.
Pro electricians use a variety of tools to pull cable and wire. When pulling either high or low voltage cables, you need good electrical wire pulling tools. You also need to understand which tool is the right tool for the job.
While wire pulling is simply part of the job, it can slow down those new to the electrical trade. Recent advances have thrust new products onto the market. These new electrical wire pulling tools can save you time and money if used properly. Whether you find yourself in a complex retrofit or a new commercial job, the right electrical wire pulling tools can reduce frustration and shave time off the job.
We want to cover several things in this article. Selecting the right wire pulling tools for the job is the primary challenge. You must also understand how those tools work and in what scenario each excels. The right tool can land you in a happy place—and the wrong tool may put set you up for some long, grueling hours. Each tool, from fish rods and tape to conduit pistons and pull cord, have their place. The best wire pulling tools vary from application to application.
This is your number one stop for pulling 12 gauge wires or even low voltage cable through conduit. A good fish tape is going to make or break you. We look for features that keep you safe or speed up the work.
Consider opting for non-conductive material like fiberglass or a threaded or adjustable nose pin that easily adapts to your needs. Fiberglass tapes will offer additional protection against contacting a live circuit. The trade-off is rigidity. A steel tape can push and pull with a lot more authority and strength before bending.
When you get a fish tape, make sure you have ample length for the type of work you do. Also, be sure to get something that has a stable and solid reel not prone to binding. We really like the Southwire SIMpull series as well as some models from Klein Tools. With truly long, bendy runs of 1/2-inch conduit, you may require the stiffness of more traditional steel or fiberglass products.
The difference between fish tape and rods is that rods are shorter lengths of material that are not used in conjunction with a reel. Where reels are great for long conduit runs, rods are excellent for fishing up and down wall cavities and across other hidden areas where rigidity gives you an edge. You also typically have the ability to splice rods together for greater lengths.
Other features to consider include glow rods that are easily visible in ceiling, floor, and wall cavities. If you only do light work or short distances, non-conductive wire pulling rods are going to be your staple product.
Rods typically come in lengths of 3 to 6 feet, and several in between. There are numerous heads to accomplish nearly any task (magnetic, loops, hooks, etc). Rods are perfect for pulling network lines, cable/satellite TV, telephone, thermostat, and other wiring or cable short distances. Klein has a recent line of Splinter Guard fiberglass fish rods that we absolutely love. They do a better job at not creating immediate splinters as the rods invariably run up against joists, drywall, and other materials on a daily basis. They also glow in the dark.
You have never fished string or leader wire until you’ve attached it to a conduit piston and literally sucked it through a line. No-fuss, no-muss. The added benefit is that the conduit gets cleaned out in the process. This works really well for high-end residential and commercial jobs that require a new wire to be run through conduit over longer distances. There is some prep work involved, but it’s an excellent solution. For bent or obstructed conduit, you can use airbags that adapt better to the needs of conduit that isn’t a straight shot.
If you’re going to pull electrical cable, you want to use an appropriately-sized nylon string that is strong, light, and ready to provide a lot of tensile strength. You’ll see tensile strength marked in “pounds”. That’s pounds of pull force and you can typically find values between 22 and 500 lbs. Keep in mind that higher strength typically means a heavier cord. You can even buy, from some companies like Kena, piston/pull string combo packs that come ready to be vacuumed through a line (see above).
For truly short runs, you can also investigate systems like the Klein Tools magnetic wire pulling system ($26.45) or the Fish n Pull wire pulling system.
When dealing with residential electrical jobs, a right angle drill usually suffices for creating holes in metal. If, however, you plan to run conduit through steel studs in a commercial setting, you might want to invest in a metal stud punch. This takes the hassle out of inserting metal conduit through steel studs.
Good models will handle up to 20 gauge steel and also insert stud bushings to protect your conduit and cable from sharp metal edges.
In continuing with our commercial conduit theme, a conduit bender is also essential. While you can get a more sophisticated model, there are a handful of manual “hand” benders that work extremely well provided you aren’t going to bend a ton of material in a day. The “hand” benders rely on your feet, with the metal handle guiding the fulcrum of the bend. For larger jobs, a power bender often arrives on the scene to facilitate larger pipe and higher numbers of bends.
It sounds obvious (or like a bad joke) but lubricant makes your wire pulling easier. Better wire pulling lubricants leave less mess and go further per amount used. It’s a material that is non-corrosive to aluminum, copper, PVC, and galvanized steel. It dries to a non-toxic lubricating powder after it’s applied.
You primarily used this with high-stress electrical work as well as communications cable pulling. These are areas where friction is your enemy. The lubricant is water-soluble and typically doesn’t bother the skin. The newest types we’ve seen claim 100% non-toxicity and environmental friendliness.
Hopefully, this guide will expose you to the best electrical wire pulling tools that can make this type of work more profitable for you and your company. The right tools can really cut down on time spent pulling wire through walls or conduit. Knowing about some of the more obscure tools—like airbags—should result in a lot more friendly piston-style pulling of cable through imperfect conduit. Improvements in fiberglass glow rods and foam lubricant also promise to speed up your workflow. Let us know your personal favorite wire pulling tools in the comments below.
When he's not remodeling part of his house or playing with the latest power tool, Clint enjoys life as a husband, father, and avid reader. He has a degree in recording engineering and has been involved in multimedia and/or online publishing in one form or another since 1992.
Clint’s career has covered nearly the entire realm of audio and video production. After graduating at the top of his class with an Associates Degree in Recording Engineering, he began working for the famed Soundelux studios in 1994, one of the largest post-production companies specializing in audio for feature films & television. Working on a myriad of feature films, Clint honed his skills as a dialogue editor, foley editor, and sound designer. Years later, he moved into the expanding area of video editing, where he served as the company’s senior AVID video editor for three years.
Working for such clients as Universal Pictures, Hollywood Pictures, Paramount Home Entertainment, NASA, Universal Studios, Planet Hollywood, SEGA, NASCAR, and others, Clint dealt extensively with client management as well as film & video editing, color correction, and digital video & MPEG compression. He also carries several THX certifications (Technician I and II, THX Video), and is ISF Level II Certified.
After founding the CD Media, Inc. publishing company in 1996, he went on to help start or grow several successful online publications, including Audioholics (as Editor-in-Chief for 12 years), Audiogurus, and AV Gadgets. In 2008, Clint founded Pro Tool Reviews followed by the landscape and outdoor power equipment-focused OPE Reviews in 2017. He also heads up the Pro Tool Innovation Awards, an annual awards program honoring innovative tools and accessories across the trades.
Crediting his excellent staff for the success of what is now the largest power tool review publication in the industry, Clint DeBoer hopes to see continued growth for the company as it rapidly expands its reach. Pro Tool Reviews critically reviews hundreds of hand tools, power tools, and accessories each year to help inform users about the best and newest products in the industry. Reaching everyone from the construction industry professional and tradesman to the serious DIYer, Pro Tool Reviews helps tool consumers shop better, work smarter, and stay aware of what tools and products can help put them at the top of their game.
Table saws are undeniably the kings of cutting sheet goods. The concept is simple: place a motor below a solid table to spin a blade through the surface and watch the sawdust fly. The idea may be simple, but there are a lot of things to think about when you’re looking for the best portable jobsite […]
What is an impact driver and what do you use it for? It’s a question we all had to learn the answer to at some point and we’re glad to help you out! Whether you’re adding to your personal tool collection or you’re new to the construction industry, they are incredibly useful tools and are […]
After testing dozens of options, our team picked the absolute best cordless reciprocating saw models from manufacturers we trust the most. What sets these saws apart from the rest of the cordless reciprocating saws? Some run on higher voltages, such as 36V or 60V (54V max). Others use advanced battery technology to pull more power […]
Lighting has been a big part of what I do professionally for over thirty years. I am a professional photographer and videographer for the Polk Museum of Art in Lakeland, FL. Nineteen of those years were spent as the exhibits manager. An exhibits manager is the person that oversees the installations of the art exhibits […]
OK yet crazy oversimplification of the skill and challenge that Fishing Wire can encompass but everyone has to start somewhere! For me the Fish device coupled with String are the main tools for everyday work. As was already mentioned briefly it is crazy to make a difficult Fish and then not leave a Pull Wire behind for the next time and this can not be overstated I think. Always use string and always leave enough if you can to make a return pull or tie together to do the same. There is little more frustrating than spending time on a… Read more »
Steel Fish tape with a leader for anything pipe that’s under 200 feet. They’re a pain to unravel, push, and they struggle with saddle bends. But it works, and when it gets stuck, it can be fished from the other side. Vacuum and blower for anything over 300 feet. Usually underground. Vac always wins out, but cost of setting up, esp when overhead. Portable battery vacs are the best knees, else we are pushing a gas generator around. Blowers some guys swear by, the problem is that theres a chance of turbulence and a coil forming inside the line. Vacs… Read more »
As an Amazon Associate, we may earn income when you click on an Amazon link. Thanks for helping us do what we love.
See our Privacy Policy and Terms & Conditions.
Pro Tool Reviews is a successful online publication that has been providing tool reviews and industry news since 2008. In today’s world of Internet news and online content, we found that more and more professionals researched a large majority of their major power tool purchases online. That piqued our interest.
There’s one key thing to note about Pro Tool Reviews: We’re all about the professional tool user and tradesman!
Copyright ©2008-2022 Pro Tool Reviews, LLC. All rights reserved.
Professional Tool Reviews for Pros